Surface Method · LPI / PT

Liquid Penetrant Inspection

A fast, highly sensitive method for finding surface-breaking cracks, porosity, and leaks on virtually any non-porous material.

Overview

What is Liquid Penetrant Inspection?

Liquid penetrant inspection (also called dye penetrant testing, PT) is one of the most versatile and cost-effective NDT methods for detecting discontinuities open to the surface. A low-viscosity penetrant is drawn into surface defects by capillary action, excess is removed, and a developer pulls the trapped penetrant back out to form a visible indication.

Gulf Coast NDT performs both portable aerosol PT in the field and bench-scale immersion testing in the shop, using visible (color-contrast) and fluorescent techniques to match the sensitivity your specification demands. Because PT relies only on capillary action, it works on non-magnetic materials where magnetic particle testing cannot — stainless steels, aluminum, titanium, castings, welds, ceramics, and plastics.

Capabilities

What LPI / PT Delivers

  • Surface-breaking fatigue and stress cracks
  • Weld toe and crater cracks, laps, and cold shuts
  • Porosity, pinholes, and leak paths in castings
  • Grinding and heat-treatment cracks
  • Seams and forging defects open to the surface
Our Process

How It Works

Surface preparation

Clean and dry the test area so penetrant can enter defects without contamination masking them.

Penetrant application

Apply visible or fluorescent penetrant and allow the specified dwell time for capillary action.

Excess removal

Remove surface penetrant with a solvent, water wash, or emulsifier without over-cleaning.

Developer & evaluation

Apply developer, let indications bleed out, then interpret under white or UV-A light and document.

Where It's Used

Applications

  • Weld inspection on piping and pressure vessels
  • Castings and forgings acceptance
  • Turnaround and shutdown crack surveys
  • Aerospace and rotating-equipment components
  • New-fabrication QA/QC
Equipment & Standards

Techniques, Equipment & Standards

Our technicians are qualified to ASNT SNT-TC-1A Level II and Level III and select the penetrant system — solvent-removable, water-washable, or post-emulsifiable — to meet your code and sensitivity level.

  • Visible (color-contrast) & fluorescent penetrant systems
  • Portable aerosol and immersion (bench) methods
  • ASTM E165 / E1417
  • ASME BPVC Section V, Article 6
  • AWS D1.1 weld acceptance

Need Liquid Penetrant Inspection?

Tell us about your project and we'll get you a fast, no-nonsense quote.